Post by JR Van Osten on Jul 5, 2012 23:48:20 GMT -5
This is a like new injection system for a standard deck (9.8) big block chevy. It is a Holley tunnel ram, polished, with a polished adapter plate and a 3" billet, polished Good Vibrations hat spacer. On top is a Enderle bird catcher, polished with polished butterflies and a black fiberglass face plate. Comes with distribution block and stainless steel hard lines and nozzles, an Enderle alcohol barrel valve and a morse cable throttle mount with return spring. Manifold also has a distributor clamp and all holes and threads are clean and undamaged. Ran this for about 4 events on a 505" BBC on alcohol and ran low 8's in an altered. We never refined the tune up and the set up would have run in the 7.70-7.80's easy. No leaks and the butterflies are well fit. Never had a problem setting the idle with this set up and start up was a breaze with a little gasoline squirt before turning it over. The entire unit is a little hefty, so to ship it I may have to ship in separate boxes, so I am asking for a fair amount for the UPS. I will accept bank transfer and PayPal only. If you have any questions, please ask before bidding. It does come with the nozzles, but I need to verify which nozzles are in it. This set up is great for a mid to large cubic in big block on alcohol, but I am sure you can easily adapt to gasoline if you want. No fuel pump is included.
www.ebay.com/itm/251101632264?item=251101632264&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr
www.ebay.com/itm/251101632264?item=251101632264&viewitem=&sspagename=ADME:L:LCA:MOTORS:1123&vxp=mtr