caster camber

[ivan]

I have a 100" wheelbase altered at 1760 lbs straight axle what would be the best caster and camber for this and would I need a panhard bar with this has a croosover leaf with radious rods -thanks

[dmoseley]

Ivan... I to have the same set up as you. As far as caster, 9-12 degrees is plenty. I use to have about 15. It shook it head at the shift. and wobbled at the backup.. Not any more. As far as camber is concerned 1 degree is what I have. And you don't need a panard bar with the cross leaf spring. But make that spring as stiff as you can. You won't need suspension in drag racing.. Oh and the toe in should be about 1/16" to 3/32" I can steer the car like a street rod.. Mine is 1550lb.with driver. 103"wb... Fiat. Good Luck..

[ivan]

thanks for the info-Ivan