|
|
Pan ?
Feb 23, 2008 14:38:18 GMT -5
Post by snarlin on Feb 23, 2008 14:38:18 GMT -5
Does anyone know what wall thickness a aluminum pan should be inleiu of a diaper  - Thanks, Snarlin |
|
|
|
Pan ?
Feb 23, 2008 16:51:42 GMT -5
Post by Jeff Smith on Feb 23, 2008 16:51:42 GMT -5
NHRA does not specify, I built mine out of .050. All it is required to do is contain the oil in the event of a rod failure.
|
|
|
|
Pan ?
Apr 7, 2008 22:54:45 GMT -5
Post by Dragster Jeff on Apr 7, 2008 22:54:45 GMT -5
I made mine out of. 090 With 3" sides on it. covers from motor plate to in front of the balancer. I couldn't figure how to get it to cover to the back of the flywheel without doing away with the motor plate.
D.J.
|
|
|
|
Pan ?
Apr 8, 2008 18:31:39 GMT -5
Post by Jeff Smith on Apr 8, 2008 18:31:39 GMT -5
Yeah, somebody was smoking crack when they came up with that one. I can't figure out why it needs to be in front of the dampner either. A diaper doesn't run that far forward or back and if you break the crank snout or flange off, ain't nothing gonna stop the splatter any way.
|
|
