chuck
Junior Member
Posts: 130
|
Post by chuck on Dec 20, 2008 22:56:00 GMT -5
Has anyone ever hooked up a power glide to a 392 hemi ? I have talked to JW transmissions and Wil Cap . One makes a ultra bell housing and the other an adaptor plate . A 727 maybe the way to go . Thanks Chuck
|
|
|
|
Post by Eric on Dec 21, 2008 9:39:25 GMT -5
Go with the Power Glide . They can make them stronger than you'll ever need - A friend of mine has been through four 727's behind his 526 Hemi . He's going to gut a Glide in it
|
|
dprochison
Junior Member
Just Stab It and Streer IT!
Posts: 172
|
Post by dprochison on Dec 21, 2008 17:26:38 GMT -5
Is this the Chuck that brought the digger from Joel?I might still have an adapter plate for a 392 to glide in my Shed.Got to dig the Snow away from the shed though! If your looking for one let me know.Dean
|
|
chuck
Junior Member
Posts: 130
|
Post by chuck on Dec 22, 2008 16:03:04 GMT -5
Yes it's the same Chuck . I sure could use it so dig away ! Let me know where to send the money . Is there anything you don't have ! Thanks Chuck
|
|
dprochison
Junior Member
Just Stab It and Streer IT!
Posts: 172
|
Post by dprochison on Dec 25, 2008 14:36:37 GMT -5
Chuck,got it dug out.Send me an address to send it to and see if you can use it.Dean
dprochison@yahoo.com
|
|
chuck
Junior Member
Posts: 130
|
Post by chuck on Dec 25, 2008 23:26:28 GMT -5
Will do , thanks Dean . Chuck
|
|
|
|
Post by jgruzen on Dec 26, 2008 9:21:16 GMT -5
Hey Deano...While your "rootin' around" that storage area of yours, please remove the snow and see if you by chance, have an adapter plate to mate a 354 Hemi to an 'early Ford' transmission......Like '39 Ford...Or if anyone else might have one, please "E" mail me...Thx..Joel
|
|
dprochison
Junior Member
Just Stab It and Streer IT!
Posts: 172
|
Post by dprochison on Dec 26, 2008 12:48:41 GMT -5
Merry Chrismas Joel,I don't have one ,BUT I'll call one of my ratrod buddies up,they always have wierd old stuff like that.While I'm at it do you want me to see if he has a 39 trans w/Zepher gears in it?Dean
|
|
chuck
Junior Member
Posts: 130
|
Post by chuck on Dec 26, 2008 14:31:43 GMT -5
Hey Joel , Try Wil Cap (805)481-7639 . What's a Zepher ? Chuck
|
|
|
|
Post by hyerus1 on Dec 26, 2008 14:41:35 GMT -5
CHUCK, YOU"RE AS OLD AS I AM AND YOU DON"T KNOW WHAT ZEPHER GEARS ARE?  ? SHAME ON YOU!!! HA HA. OZZIE. |
|
dprochison
Junior Member
Just Stab It and Streer IT!
Posts: 172
|
Post by dprochison on Dec 26, 2008 15:40:51 GMT -5
Joel,you might try Jim Drake on this,Jim's got his Phone #.
Chuck,Lincoln Zepher Gears.Get your OLD hot rod books out and check it out.
|
|
|
|
Post by jandmracing on Jan 6, 2009 1:59:19 GMT -5
Mike's Transmission is a dealer for JW transmission and also can build a badass powerglide. I have the 2,000 HP glide behind a 900HP 572 and have not even had a slight problem out of it. The JW super case I have has a seperate bellhousing for the GM product engines. They also can adapt to the Mopar and Ford engines, just change out the bellhousing. Mike also has the Monsterglide for the 2,000HP and up. I also have a Continetal torkeconverter form Mike two years and counting and also two transmissions. Mike is the way for top HP engines.
Jeff
|
|
chuck
Junior Member
Posts: 130
|
Post by chuck on Jan 6, 2009 19:23:40 GMT -5
Thanks Jeff , I have talked to JW about there Ultra bell housing . It is 18'' wide and my car is 17.5'' . They said I could trim it but it is SFI approved . They are changing foundries and it may take a while . But still under consideration . I will call Mikes . Chuck
|
|
