|
|
Post by biged93212 on Jul 16, 2016 23:05:01 GMT -5
Would like to run a gas class if possible. Don't know what she will do. They turned the Friday night drags into street tuner nights and I can't test my bracket car. Will I be able too make passes at the August event before entering a class? Or do I have to have my decision made at tech card time? Thanks Eddie.
|
|
|
|
Post by E Rushing on Jul 17, 2016 21:07:48 GMT -5
Hi and welcome. If you can tell everybody a little about the car (IE) motor size, door car or dragster where it came from or if you didn't build it someone probably knows the car. Also depending on where you live, LA area has test and tunes and I have not looked but Sacramento might have one before ANRA.
Good Luck
Emmett
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 18, 2016 7:30:38 GMT -5
And ED...You can also run the Hot Rod class, which is a bracket.(Dial in). You get a couple of shots to see where the car is at, then go from there.. Dial in... And ANRA Also lets you enter and run an additional class if you find that the car qualifies for one of the "Gas Class" index, ie 10.60; 9.60; 8.60 etc.. Just check to make sure that it can pass Tech, and has all the updated safety equipment... Good luck..
|
|
|
|
Post by biged93212 on Jul 18, 2016 19:47:04 GMT -5
Hi and welcome. If you can tell everybody a little about the car (IE) motor size, door car or dragster where it came from or if you didn't build it someone probably knows the car. Also depending on where you live, LA area has test and tunes and I have not looked but Sacramento might have one before ANRA. Good Luck Emmett |
|
|
|
Post by biged93212 on Jul 18, 2016 20:00:36 GMT -5
Emmett it's a 68 camaro i built my self. Has 555 BBC makes 700 at flywheel. Th400 with brake and 3500 stall. Has a glass nose. Running on 28 in slicks and 4.30. Mathematics show me hitting rev limiter at 116. I see a gears change coming. Thanks Eddie
|
|
|
|
Post by biged93212 on Jul 18, 2016 20:03:12 GMT -5
Joelgruzmen your right probably do Hot Rod class see what she runs. Then go from there. Thanks Eddie See you guys at the Track.
|
|
|
|
Post by glofria on Jul 19, 2016 10:29:01 GMT -5
How much does the car weigh?
What type of rear end suspension?
What type of front end suspension?
How much roll cage is in the car?
What ET is your chassis cert good for?
Going fast is one thing, doing it safely is another.
|
|
|
|
Post by biged93212 on Jul 19, 2016 20:02:17 GMT -5
About3000# and has tubular a arms up front leaf springs in rear with SSM lift bars. 8 point roll bar good to 10.00. Has factory floors and firewall.
|
|
|
|
Post by biged93212 on Jul 19, 2016 23:03:46 GMT -5
About3000# and has tubular a arms up front leaf springs in rear with SSM lift bars. 8 point roll bar good to 10.00. Has factory floors and firewall.
|
|
|
|
Post by glofria on Jul 21, 2016 15:51:35 GMT -5
Well there you have it. I would bee looking to work towards D/G. Happy Hunting.
|
|
|
|
Post by biged93212 on Jul 24, 2016 15:14:19 GMT -5
Thanks
|
|
