Post by Jason Spence on Feb 15, 2020 14:56:52 GMT -5
This engine has never been raced. It spent one hour on the dyno and produced 600HP. It’s been sitting for a few years. Currently, this engine is setup for a sprint car, but can be used for drag racing with some small modifications.
Trades Accepted: Altered, enclosed trailer, what do you have?
Asking Price: 12,500 OBO
* Scat 3.50 stroke crank
* Scat 5.7 H-Beam rods
* Probe Piston forged
* Dome +12.5cc
* 1.560" Compression Height
* 0.927" Pin location
* Shaver Gear Drive
* RHS Heads
* 235 runner
* 64cc Chambers
* 2.08/1.60 valves
* .041 head gasket
* Norris rocker arms
* Howard's stud girdle
* Manley Push Rods
* 8.10 lengrh
* 5/16 .80 wall thickness
* Swedge tip
* Aviad 4 stage oil pump
* KSE front cover and HD pump
* Hilborn "0" pump
* Howard's Rev Kit
* Engle Cam
* Kinsler 2.5 Injector
* Mallory Sprint Mag 2
Trades Accepted: Altered, enclosed trailer, what do you have?
Asking Price: 12,500 OBO
* Scat 3.50 stroke crank
* Scat 5.7 H-Beam rods
* Probe Piston forged
* Dome +12.5cc
* 1.560" Compression Height
* 0.927" Pin location
* Shaver Gear Drive
* RHS Heads
* 235 runner
* 64cc Chambers
* 2.08/1.60 valves
* .041 head gasket
* Norris rocker arms
* Howard's stud girdle
* Manley Push Rods
* 8.10 lengrh
* 5/16 .80 wall thickness
* Swedge tip
* Aviad 4 stage oil pump
* KSE front cover and HD pump
* Hilborn "0" pump
* Howard's Rev Kit
* Engle Cam
* Kinsler 2.5 Injector
* Mallory Sprint Mag 2