|
|
Post by rjracing on Jan 30, 2007 19:19:22 GMT -5
I Need A set Of Injectors For A 351 Windsor Ford. I can Use 289/302 Or Cleveland Injectors. Enderle, Hilborn Or Kinsler What Do You Have?
|
|
|
|
Post by dmoseley on Jan 31, 2007 10:20:27 GMT -5
I run a cleveland Ford in my Fiat altered. Why not get a 2-4barrel high rise manifold and put an Enderle hat on it, Very simple. thats what I did..
|
|
|
|
Post by ron gribble on Feb 4, 2007 14:12:49 GMT -5
I modified a hilborn 289 manifold to fit a 351.
It works well, but the 1 13/16 throttle bore size might be too small for your combination. They are not for sale, but Id be glad to bring them to a race or? to let you see how I did it. I ran it on a 355.
Basically, I split the valley down the center, keeping the barrel valve mount attached to the side the barrel valve is linked to.
Then I machined up a valley section & screwed it together.
It can now fit either a 289-302, or 351w by changing valley panels.
Its slated to be used again for my wifes car.
Ron Gribble #7306 (ford courier)
|
|
|
|
Post by racerb on Feb 4, 2007 14:18:34 GMT -5
I Its slated to be used again for my wifes car. Ron Gribble #7306 (ford courier)
Butch |
|
|
|
Post by rjracing on Feb 5, 2007 9:43:09 GMT -5
Thanks for the info. I have used a set of 289/302 injectors on a windsor before, but I built spacers on both sides. Hopefully I can Find aset soon! Thanks Rick
|
|
