|
|
Post by crob241 on Feb 1, 2007 21:01:45 GMT -5
Does anyone know where I can get a front ujoint( ball and trunion type) for a 1964 plymouth . I can not find one anywhere. thanks
crob241@mail.com
|
|
|
|
Post by broomhilda on Feb 1, 2007 23:31:09 GMT -5
crob,
NAPA used to ave a rebuild kit for them. They are a real pain to rebuild since you have to press the pin out and they usually bend the stub shaft, you then have a vibration. I took mine to a driveshaft shop and had them make me one with a regular u-joint to replace the trunnion. It uses a flange tat bolts to the trans with the u-joint on it then a slip joint like on a 4x4 truck. Works great and about the same price as having them fix the original one. Mine was about $250.00.
Ron
|
|
|
|
Post by crob241 on Feb 2, 2007 19:07:53 GMT -5
Thank you for the info, I checked at NAPA and the could not find any listing except for the rear. I guess I will have to do the same and go to inland driveshaft .
|
|
